

Change some time between 60hz and 120hz when it dont work at first time!įor those where this Tweak not work correctly, plz send information about ure Adapter, screenshot from BetterDisplay Display informations (first 3 sections), VmmDPTool firmware info and upload ure original and modified EDID plz.Activate "Auto Apply EDID" and "Config Protection" in BetterDisplay (Use BetterDisplay: v1.4.6 or later!).Plug the adapter back in your mac and follow the steps here to apply Custom EDID (Enable DP-Transportstream over HDMI) (An example DP-Transportstream with force RGB "DP_STREAM-RGB.zip" are attached in this post.

Once it's completed flashing, unplug and replug the adapter to verify your new firmware version is: 6.03.002.(Optional) - Make backup of your firmware first or you can restore the latest one from the update tool page.Follow steps on the Cable matters firmware page linked above but use the firmware "VMM61004k120hzRGB-Fullrom.zip" (extract first) are attached in this post. If you do not have VMM6100, you'll need another adapter. Launch update tool and verify you have VMM6100.The HDMI cable connected to the adapter will need to be connected to a tv/monitor for the next step.


So basically things you'll need for RGB 10bit HDR Try to consolidate the instructions since they're dug in 20 different pages now This is a new fresh thread to talk about this, because the other one has 46 sites now and does not have the correct Title! does make the first version of this FAQ and does continue support and update this FAQ: Apple limited HDMI-Transportstream over USB-C/TB to maxed found a solution to get more than this working!
